Datasheet LT3090 (Analog Devices)

FabricanteAnalog Devices
Descripción–36V, 600mA Negative Linear Regulator with Programmable Current Limit
Páginas / Página36 / 1 — FeaTures. DescripTion. Output Current: 600mA. Single Resistor Sets Output …
Formato / tamaño de archivoPDF / 704 Kb
Idioma del documentoInglés

FeaTures. DescripTion. Output Current: 600mA. Single Resistor Sets Output Voltage. 50µA SET Pin Current: ±1% Initial Accuracy

Datasheet LT3090 Analog Devices

Línea de modelo para esta hoja de datos

Versión de texto del documento

LT3090 –36V, 600mA Negative Linear Regulator with Programmable Current Limit
FeaTures DescripTion
n
Output Current: 600mA
The LT®3090 is a 600mA, low dropout negative linear n
Single Resistor Sets Output Voltage
regulator that is easily parallelable to increase output n
50µA SET Pin Current: ±1% Initial Accuracy
current or spread heat on surface mounted boards. n
Programmable Current Limit
Designed with a precision current reference followed by a n
Positive or Negative Output Current Monitor
high performance rail-to-rail voltage buffer, this regulator n
Parallelable for Higher Current and Heat Spreading
finds use in applications requiring precision output, high n
Low Dropout Voltage: 300mV
current with no heat sink, output adjustability to zero and n
Low Output Noise: 18µV
low dropout voltage. The device can also be configured
RMS (10Hz to 100kHz)
n
Configurable as 3-Terminal Floating Regulator
as a 3-terminal floating regulator. n
Wide Input Voltage Range: –1.5V to –36V
The LT3090 features fast transient response, high PSRR n
Rail-to-Rail Output Voltage Range: 0V to –32V
and output noise as low as 18µVRMS. The LT3090 generates n Positive/Negative Shutdown Logic or UVLO a wide output voltage range (0V to –32V) while maintain- n Programmable Cable Drop Compensation ing unity gain operation. This yields virtually constant n Load Regulation: 1.2mV (1mA to 600mA) bandwidth, load regulation, PSRR and noise, regardless n Stable with 4.7µF Minimum Output Capacitor of the programmed output voltage. n Stable with Ceramic or Tantalum Capacitors n The LT3090 supplies 600mA at a typical dropout voltage Thermally Enhanced 12-Lead MSOP and 10-Lead of 300mV. Operating quiescent current is nominally 1mA 0.75mm × 3mm × 3mm DFN Packages and drops to << 1µA in shutdown. A single resistor ad- justs the LT3090’s precision programmable current limit.
applicaTions
The LT3090’s positive or negative current monitor either n Post Regulator for Switching Supplies sources a current (0.5mA/A) or sinks a current (1mA/A) n Low Noise Instrumentation and RF Supplies proportional to output current. Built-in protection includes n Rugged Industrial Supplies reverse output protection, internal current limit with fold- n Precision Power Supplies back and thermal shutdown with hysteresis. L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks and ThinSOT is a trademark of Linear Technology Corporation. All other trademarks are the property of their respective owners. Patent Pending.
Typical applicaTion
TO ADC (IMON) 0.1µF 49.9k 4.7µF 3.32k
Output Noise: 10Hz to 100kHz
VOUT SET GND IMONP LT3090 OUT –2.5V MAX IOUT 600mA + VOUT 100µV/DIV – 4.7µF 50µA 1ms/DIV 3090 TA01b IMONN V IN IN VIN: –3.5V –3V TO –10V 3.3V VOUT: –2V SHDN ILIM COUT: 4.7µF, CSET: 0.1µF 0.1µF IL: 600mA 10k 3090 TA01a 3090fa For more information www.linear.com/LT3090 1