Datasheet TLE5x09A16(D) (Infineon) - 2

FabricanteInfineon
DescripciónAngle sensors for ultra-precise angular position sensing, AMR-based
Páginas / Página33 / 2 — TLE5x09A16(D) Analog AMR/GMR Angle Sensor. Figure 1
Revisión02_00
Formato / tamaño de archivoPDF / 1.3 Mb
Idioma del documentoInglés

TLE5x09A16(D) Analog AMR/GMR Angle Sensor. Figure 1

TLE5x09A16(D) Analog AMR/GMR Angle Sensor Figure 1

Línea de modelo para esta hoja de datos

Versión de texto del documento

link to page 2 link to page 2 link to page 2 link to page 2 link to page 2
TLE5x09A16(D) Analog AMR/GMR Angle Sensor Figure 1 A usual application for TLE5x09A16(D) is the electrically commutated motor Description
The TLE5x0916(D) are angle sensor with analog outputs. They detect the orientation of a magnetic field by measuring sine and cosine angle components with
M
agneto
R
esistive (
MR
) elements. The sensors provide analog sine and cosine output voltages that describe the magnetic angle in a range of 0 to 180° (AMR sensor), and 0 to 360° (GMR sensor), respectively. There are single die and dual die combinations with a
G
iant
M
agneto
R
esistance (
GMR
) sensor for full 360° angle range or also an
A
nisotropic
M
agneto
R
esistance (
AMR
) sensor for high precision in a top-bottom configuration in one package possible. The following derivatives of the TLE5x09A16(D) sensor family are available: • Single die GMR: TLE5009A16 • Dual die GMR: TLE5009A16D • Single die AMR: TLE5109A16 • Dual die AMR: TLE5109A16D • Dual die AMR (bottom) / GMR (top): TLE5309D The differential MR bridge signals are independent of the magnetic field strength to maintain constant output voltage over a wide temperature and field range. The analog output is designed for differential or single-ended applications and an internal temperature compensation is applied for higher accuracy. The sensor is available as single die version (TLE5x09A16) and dual die version (TLE5x09A16D) for safety applications that require redundancy. The two versions are pin-compatible for easy scalability. In the dual die TLE5x09A16D, both sensor dies are supplied independently by separate supply and ground pins.
Table 1 TLE5009A16(D) Derivate ordering codes Product Type Marking Ordering Code Package Description
TLE5009A16 E1200 09A11200 SP001285624 PG-TDSO-16 3.3 V, single die, without TCO1) TLE5009A16 E1210 09A11210 SP001296110 PG-TDSO-16 3.3 V, single die, with TCO1) TLE5009A16 E2200 09A12200 SP001296118 PG-TDSO-16 5.0 V, single die, without TCO1) TLE5009A16 E2210 09A12210 SP001296114 PG-TDSO-16 5.0 V, single die, with TCO1) TLE5009A16D E1200 09A21200 SP001285628 PG-TDSO-16 3.3 V, dual die, without TCO1) TLE5009A16D E1210 09A21210 SP001296122 PG-TDSO-16 3.3 V, dual die, with TCO1) Data Sheet 2 V 2.0 2018-12 Document Outline Features Functional Safety Product Validation Potential Applications Description Table of Contents 1 Functional description 1.1 General 1.2 Pin configuration 1.3 Pin description 1.4 Block diagram 1.5 Dual die angle output 2 Specification 2.1 Application circuit 2.2 Absolute maximum ratings 2.3 Sensor specification 2.3.1 Operating range 2.3.2 Electrical parameters 2.3.3 Output parameters 2.4 Error diagnosis 2.5 Angle performance 2.6 Electrostatic discharge protection 2.7 Electro magnetic compatibility (EMC) 3 Package information 3.1 Package parameters 3.2 Package outlines 3.3 Footprint 3.4 Packing 3.5 Marking 4 Revision history