PT7C4563BQAutomotive Grade Real-time ClockFeaturesDescription • Drop-in Replacement for PT7C4563 The PT7C4563BQ serial real-time clock is an automotive- • Supports High-ESR Crystals up to 100kΩ grade low-power clock/calendar with a programmable square- • Uses External 32.768kHz Quartz Crystal wave output. It supports up to 125°C operating temperature. • Supports I2C Bus' High-Speed Mode (400kHz) • Includes Time (Hour/Minute/Second) and Calendar Address and data are transferred serially via a 2-wire (Year/Month/Date/Day) Counter Functions (BCD Code) bidirectional bus. The clock/calendar provides seconds, • Programmable Square Wave Output Signal minutes, hours, day, date, month, and year information. • Oscillator Stop Flag • Low Backup Current: Typ. 400nA at VDD=3.0V and The date at the end of the month is automatical y adjusted for TA=25°C months with fewer than 31 days—including corrections for • Operating Range: 1.3V to 5.5V leap year. The clock operates in the 24-hour format indicator. • Extended Operating Temp: -40°C to 125°C • AECQ-100 Compliant for Automotive Application Table 1 shows the basic functions of PT7C4563BQ. More • Totally Lead-Free & Ful y RoHS Compliant (Notes 1 & 2) details are shown in the Overview of Functions section. • Halogen and Antimony Free. “Green” Device (Note 3)
• PPAP Capable (Note 4)
• Packaging (Pb-free & Green): 8-Pins, SOIC (W) Table 1. Basic Functions of PT7C4563BQ ItemFunctionPT7C4563B Source: Crystal: 32.768kHz √ 1 Oscillator Oscillator Enable/Disable - Oscillator Fail Detect √ Time 12-Hour - Display 24-Hour √ 2 Time Century Bit - Time Count Chain Enable/Disable - 3 Interrupt Alarm Interrupt √ 4 Programmable Square Wave Output (Hz) 1, 32, 1.024k, 32.768k 2-Wire I2C Bus √ 5 Communication Burst Mode -
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. Automotive products are AEC-Q100 qualified and are PPAP capable. Refer to https://www.diodes.com/quality/. PT7C4563BQ www.diodes.com July 2019 Document Number DS41477 Rev 2-2 1