Datasheet AL8116 (Diodes)

FabricanteDiodes
DescripciónFlexible 0-10V Dimming Signal Interface Controller
Páginas / Página13 / 1 — AL8116. FLEXIBLE 0 TO 10V DIMMING SIGNAL INTERFACE CONTROLLER. …
Formato / tamaño de archivoPDF / 745 Kb
Idioma del documentoInglés

AL8116. FLEXIBLE 0 TO 10V DIMMING SIGNAL INTERFACE CONTROLLER. Description. Pin Assignments. (Top View). SOT26 (Type CJ). Features

Datasheet AL8116 Diodes

Línea de modelo para esta hoja de datos

Versión de texto del documento

AL8116 FLEXIBLE 0 TO 10V DIMMING SIGNAL INTERFACE CONTROLLER Description Pin Assignments
The AL8116 is a flexible dimming signal interface controller that can
(Top View)
convert the three different inputs of dimmer type including 0 to 10V DC linear dimming, 0 to 100% duty cycle PWM (pulse width modulation) signal and a simple resistive potentiometer to an output VCC 1 6 DIM PWM signal. It is easy to provide an isolation dimming control via an GND 2 5 CLAMP opto-coupler to the primary side LED driver. OUT 3 4 ISET The AL8116 has a wide input voltage range from 10V to 56V. The DIM pin of the AL8116 can output an adjustable accurate bias current that make it suit for both active and passive 0 to 10V dimmers,
SOT26 (Type CJ)
meanwhile potentiometers. The AL8116 output duty cycle accuracy is typically ±2.5% and the minimum output duty cycle can be set through the CLAMP pin resistor. The AL8116 has an internal auto-recoverable over-temperature- protection. The AL8116 is available in SOT26 (Type CJ) package to minimize PCB space as well as external component count.
Features Applications
Wide VCC Operating Range 10V to 56V 0 to 10V Dimming Luminaires Low Operation Current (Typical 600μA) Dimmable LED Power Supply Precision Dimmer Type with Dimming Control Devices  Voltage Potential: 0/1V to 10V Commercial LED Lighting  PWM Dimming: 0.2k to 10kHz Smart LED Lighting  Potentiometer: 0 to 100k Adjustable Bias Current Source of DIM Pin Accurate Output Duty Cycle Tolerance ±2.5% Adjustable Minimum Output PWM Duty Clamping: 8%, 6%, 4%, and 2% Built-In Over Temperature Protection for Chip
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/200, PPAP capable, and manufactured in IATF 16949 certified facilities), please contact us or your local Diodes representative. https://www.diodes.com/quality/product-definitions/
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. AL8116 1 of 13 April 2020 Document number: DS42629 Rev. 2 - 2
www.diodes.com
© Diodes Incorporated