Datasheet AP4405AEN (Asahi Kasei Microdevices) - 6
| Fabricante | Asahi Kasei Microdevices |
| Descripción | Ultra-Low Power Voltage Detector with P and N-Channel MOSFET Switch |
| Páginas / Página | 19 / 6 — 6. Absolute Maximum Ratings. Parameter. Symbol. Min. Max. Unit. 7. … |
| Formato / tamaño de archivo | PDF / 972 Kb |
| Idioma del documento | Inglés |
6. Absolute Maximum Ratings. Parameter. Symbol. Min. Max. Unit. 7. Recommended Operating Conditions
Línea de modelo para esta hoja de datos
Versión de texto del documento
[AP4405AEN]
6. Absolute Maximum Ratings Parameter Symbol Min. Max. Unit
VIN -0.3 VDD 6.5 V OUT Pin Voltage (*1) VSS-0.3 POL VDD + 0.3 V PMOSD -0.3 6.5 V NMOSD -0.3 6.5 V Output Current OUT pin Current (Iout) -10 +10 mA 2.56 (EPAD→VSS) Power Dissipation (*2) Pd - W 0.94 (EPAD →Float) Storage Temperature Tstg -55 +150 C Notes: *1. All voltages are with reference to VSS = 0 V. *2. The value is derived from condition below. Figure 2 shows the simulation results. 74mm□-1.6t-4layer FR-4 PCB, using Sn-3.0Ag-0.5Cu solder Bottom exposed PAD(EPAD) is mounted: θja=39.07 (°C /W) Bottom exposed PAD(EPAD) is unmouded: θja=106.04 (°C /W) Figure 2. Power Dissipation vs Temperature WARNING: Operation at or beyond these limits may result in permanent damage to the device. Normal operation is not guaranteed at these extremes.
7. Recommended Operating Conditions
Parameter Symbol min max Unit Operation Temperature Ta -40 +85 C Power Supply Volgtage VIN 1.2 VDD 5.5 V AKM assumes no responsibility for the usage beyond the conditions in this data sheet. 019001973-E-00 2019/3 - 6 -
6. Absolute Maximum Ratings Parameter Symbol Min. Max. Unit
VIN -0.3 VDD 6.5 V OUT Pin Voltage (*1) VSS-0.3 POL VDD + 0.3 V PMOSD -0.3 6.5 V NMOSD -0.3 6.5 V Output Current OUT pin Current (Iout) -10 +10 mA 2.56 (EPAD→VSS) Power Dissipation (*2) Pd - W 0.94 (EPAD →Float) Storage Temperature Tstg -55 +150 C Notes: *1. All voltages are with reference to VSS = 0 V. *2. The value is derived from condition below. Figure 2 shows the simulation results. 74mm□-1.6t-4layer FR-4 PCB, using Sn-3.0Ag-0.5Cu solder Bottom exposed PAD(EPAD) is mounted: θja=39.07 (°C /W) Bottom exposed PAD(EPAD) is unmouded: θja=106.04 (°C /W) Figure 2. Power Dissipation vs Temperature WARNING: Operation at or beyond these limits may result in permanent damage to the device. Normal operation is not guaranteed at these extremes.
7. Recommended Operating Conditions
Parameter Symbol min max Unit Operation Temperature Ta -40 +85 C Power Supply Volgtage VIN 1.2 VDD 5.5 V AKM assumes no responsibility for the usage beyond the conditions in this data sheet. 019001973-E-00 2019/3 - 6 -