Datasheet H11AV1, H11AV1A, H11AV2, H11AV2A (Fairchild)

FabricanteFairchild
Descripción6-Pin DIP Optoisolators Transistor Output
Páginas / Página7 / 1 — GlobalOptoisolator. ‘A’ Suffix = 0.400. Wide Spaced Leadform (Same as ‘T’ …
Formato / tamaño de archivoPDF / 154 Kb
Idioma del documentoInglés

GlobalOptoisolator. ‘A’ Suffix = 0.400. Wide Spaced Leadform (Same as ‘T’ Suffix.)

Datasheet H11AV1, H11AV1A, H11AV2, H11AV2A Fairchild

Línea de modelo para esta hoja de datos

Versión de texto del documento

GlobalOptoisolator
 The H11AV1,A and H11AV2,A devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon phototransistor detector. • Guaranteed 70 Volt V(BR)CEO Minimum •
‘A’ Suffix = 0.400

Wide Spaced Leadform (Same as ‘T’ Suffix.)

To order devices that are tested and marked per VDE 0884 requirements, the suffix ”V” must be included at end of part number. VDE 0884 is a test option.
6 1
Applications

STANDARD THRU HOLE
General Purpose Switching Circuits • Interfacing and coupling systems of different potentials and impedances • Monitor and Detection Circuits • Regulation and Feedback Circuits
SCHEMATIC
• Solid State Relays 1 6
MAXIMUM RATINGS
(TA = 25°C unless otherwise noted) 2 5
Rating Symbol Value Unit
3 4
INPUT LED
Reverse Voltage VR 6 Volts Forward Current — Continuous IF 60 mA PIN 1. LED ANODE 2. LED CATHODE LED Power Dissipation @ TA = 25°C PD 120 mW 3. N.C. with Negligible Power in Output Detector 4. EMITTER Derate above 25°C 1.41 mW/°C 5. COLLECTOR
OUTPUT TRANSISTOR
6. BASE Collector–Emitter Voltage VCEO 70 Volts Emitter–Base Voltage VEBO 7 Volts Collector–Base Voltage VCBO 70 Volts Collector Current — Continuous IC 150 mA Detector Power Dissipation @ TA = 25°C PD 150 mW with Negligible Power in Input LED Derate above 25°C 1.76 mW/°C
TOTAL DEVICE
Isolation Surge Voltage(1) VISO 7500 Vac(pk) (Peak ac Voltage, 60 Hz, 1 sec Duration) Total Device Power Dissipation @ TA = 25°C PD 250 mW Derate above 25°C 2.94 mW/°C Ambient Operating Temperature Range TA – 55 to +100 °C Storage Temperature Range Tstg – 55 to +150 °C Soldering Temperature (10 sec, 1/16″ from case) TL 260 °C 1. Isolation surge voltage is an internal device dielectric breakdown rating. 1. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common.