Datasheet MAX7219, MAX7221 (Analog Devices)
| Fabricante | Analog Devices |
| Descripción | Serially Interfaced, 8-Digit, LED Display Drivers |
| Páginas / Página | 15 / 1 — here. MAX7219/MAX7221. Serially Interfaced, 8-Digit LED Display Drivers. … |
| Formato / tamaño de archivo | PDF / 1.4 Mb |
| Idioma del documento | Inglés |
here. MAX7219/MAX7221. Serially Interfaced, 8-Digit LED Display Drivers. General Description. Features. Ordering Information. PART
Línea de modelo para esta hoja de datos
Versión de texto del documento
Click
here
to ask about the production status of specific part numbers.
MAX7219/MAX7221 Serially Interfaced, 8-Digit LED Display Drivers General Description Features
The MAX7219/MAX7221 are compact, serial input/ ● 10MHz Serial Interface output common-cathode display drivers that interface ● Individual LED Segment Control microprocessors (μPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual ● Decode/No-Decode Digit Selection LEDs. Included on-chip are a BCD code-B decoder, ● 150μA Low-Power Shutdown (Data Retained) multiplex scan circuitry, segment and digit drivers, and ● Digital and Analog Brightness Control an 8x8 static RAM that stores each digit. Only one ● Display Blanked on Power-Up external resistor is required to set the segment current for all LEDs. The MAX7221 is compatible with SPI™, QSPI™, ● Drive Common-Cathode LED Display and MICROWIRE™, and has slew-rate-limited segment ● Slew-Rate Limited Segment Drivers drivers to reduce EMI. for Lower EMI (MAX7221) A convenient 4-wire serial interface connects to all ● SPI, QSPI, MICROWIRE Serial Interface (MAX7221) common μPs. Individual digits may be addressed ● 24-Pin DIP and SO Packages and updated without rewriting the entire display. The MAX7219/MAX7221 also allow the user to select code-B
Ordering Information
decoding or no-decode for each digit.
PART TEMP RANGE PIN-PACKAGE
The devices include a 150μA low-power shutdown mode,
MAX7219
CNG 0°C to +70°C 24 Narrow Plastic DIP analog and digital brightness control, a scan-limit register that allows the user to display from 1 to 8 digits, and a test MAX7219CWG 0°C to +70°C 24 Wide SO mode that forces all LEDs on. MAX7219C/D 0°C to +70°C Dice* For applications requiring 3V operation or segment blinking, MAX7219ENG -40°C to +85°C 24 Narrow Plastic DIP refer to the MAX6951 data sheet. MAX7219EWG -40°C to +85°C 24 Wide SO
Applications
MAX7219ERG -40°C to +85°C 24 Narrow CERDIP ● Bar-Graph Displays ● Panel Meters
Ordering Information continued at end of data sheet.
● Industrial Controllers ● LED Matrix Displays *Dice are specified at TA = +25°C.
Pin Configuration Typical Application Circuit
TOP VIEW
+
DIN 1 24 DOUT DIG 0 2 23 SEG D DIG 4 3 22 SEG DP +5V GND 4 21 SEG E 19 9.53kΩ DIG 6 5
MAX7219
20 SEG C V+
MAX7221
18 DIG 2 6 19 V+ ISET DIG 0–DIG 7 8 DIGITS DIG 3 7 18 ISET
MAX7219
MOSI 1 DIN
MAX7221
DIG 7 8 17 SEG G µP I/O 12 LOAD (CS) GND 9 16 SEG B SCK 13 SEG A–G, CLK DIG 5 10 15 SEG F 9 SEG DP 8 SEGMENTS GND DIG 1 11 14 SEG A GND 4 LOAD (CS) 12 13 CLK ( ) MAX7221 ONLY ( ) MAX7221 ONLY
DIP/SO 8-DIGIT µP DISPLAY
SPI and QSPI are trademarks of Motorola Inc. MICROWIRE is a trademark of National Semiconductor Corp. 19-4452; Rev 6; 8/21
here
to ask about the production status of specific part numbers.
MAX7219/MAX7221 Serially Interfaced, 8-Digit LED Display Drivers General Description Features
The MAX7219/MAX7221 are compact, serial input/ ● 10MHz Serial Interface output common-cathode display drivers that interface ● Individual LED Segment Control microprocessors (μPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual ● Decode/No-Decode Digit Selection LEDs. Included on-chip are a BCD code-B decoder, ● 150μA Low-Power Shutdown (Data Retained) multiplex scan circuitry, segment and digit drivers, and ● Digital and Analog Brightness Control an 8x8 static RAM that stores each digit. Only one ● Display Blanked on Power-Up external resistor is required to set the segment current for all LEDs. The MAX7221 is compatible with SPI™, QSPI™, ● Drive Common-Cathode LED Display and MICROWIRE™, and has slew-rate-limited segment ● Slew-Rate Limited Segment Drivers drivers to reduce EMI. for Lower EMI (MAX7221) A convenient 4-wire serial interface connects to all ● SPI, QSPI, MICROWIRE Serial Interface (MAX7221) common μPs. Individual digits may be addressed ● 24-Pin DIP and SO Packages and updated without rewriting the entire display. The MAX7219/MAX7221 also allow the user to select code-B
Ordering Information
decoding or no-decode for each digit.
PART TEMP RANGE PIN-PACKAGE
The devices include a 150μA low-power shutdown mode,
MAX7219
CNG 0°C to +70°C 24 Narrow Plastic DIP analog and digital brightness control, a scan-limit register that allows the user to display from 1 to 8 digits, and a test MAX7219CWG 0°C to +70°C 24 Wide SO mode that forces all LEDs on. MAX7219C/D 0°C to +70°C Dice* For applications requiring 3V operation or segment blinking, MAX7219ENG -40°C to +85°C 24 Narrow Plastic DIP refer to the MAX6951 data sheet. MAX7219EWG -40°C to +85°C 24 Wide SO
Applications
MAX7219ERG -40°C to +85°C 24 Narrow CERDIP ● Bar-Graph Displays ● Panel Meters
Ordering Information continued at end of data sheet.
● Industrial Controllers ● LED Matrix Displays *Dice are specified at TA = +25°C.
Pin Configuration Typical Application Circuit
TOP VIEW
+
DIN 1 24 DOUT DIG 0 2 23 SEG D DIG 4 3 22 SEG DP +5V GND 4 21 SEG E 19 9.53kΩ DIG 6 5
MAX7219
20 SEG C V+
MAX7221
18 DIG 2 6 19 V+ ISET DIG 0–DIG 7 8 DIGITS DIG 3 7 18 ISET
MAX7219
MOSI 1 DIN
MAX7221
DIG 7 8 17 SEG G µP I/O 12 LOAD (CS) GND 9 16 SEG B SCK 13 SEG A–G, CLK DIG 5 10 15 SEG F 9 SEG DP 8 SEGMENTS GND DIG 1 11 14 SEG A GND 4 LOAD (CS) 12 13 CLK ( ) MAX7221 ONLY ( ) MAX7221 ONLY
DIP/SO 8-DIGIT µP DISPLAY
SPI and QSPI are trademarks of Motorola Inc. MICROWIRE is a trademark of National Semiconductor Corp. 19-4452; Rev 6; 8/21