Datasheet MP2315 (Monolithic Power Systems) - 2
| Fabricante | Monolithic Power Systems |
| Descripción | High Efficiency 3A, 24V, 500kHz, with AAM (light load mode), Synchronous Step Down Converter in TSOT23-8 package |
| Páginas / Página | 18 / 2 — MP2315 – 24V, 3A SYNC STEP DOWN CONVERTER. ORDERING INFORMATION. Part … |
| Formato / tamaño de archivo | PDF / 1.2 Mb |
| Idioma del documento | Inglés |
MP2315 – 24V, 3A SYNC STEP DOWN CONVERTER. ORDERING INFORMATION. Part Number*. Package. Top Marking. PACKAGE REFERENCE. TOP VIEW
Línea de modelo para esta hoja de datos
Versión de texto del documento
MP2315 – 24V, 3A SYNC STEP DOWN CONVERTER ORDERING INFORMATION Part Number* Package Top Marking
MP2315GJ TSOT23-8 AGC * For Tape & Reel, add suffix –Z (e.g. MP2315GJ–Z);
PACKAGE REFERENCE TOP VIEW
AAM 1 8 FB IN 2 7 VCC SW 3 6 EN/SYNC GND 4 5 BST
TSOT23-8 ABSOLUTE MAXIMUM RATINGS
(1)
Thermal Resistance
(4)
θJA θJC
VIN ..–0.3V to +28V TSOT23-8…………………...…….100…..55..°C/W VSW.. –0.3V (-5V<10ns) to +28V (30V<10ns) V
Notes:
BST .. VSW+6V 1) Exceeding these ratings may damage the device. All Other Pins..-0.3V to +6V 2) The maximum allowable power dissipation is a function of the Continuous Power Dissipation (TA=+25°C)
(2)
... maximum junction temperature T MP2393 J (MAX), the junction-to- ambient thermal resistance θ ... 1.25W JA, and the ambient temperature TA. The maximum allowable continuous power dissipation at Junction Temperature...150°C any ambient temperature is calculated by PD (MAX) = (TJ Lead Temperature ..260°C (MAX)-TA)/θJA. Exceeding the maximum allowable power O dissipation will cause excessive die temperature, and the Storage Temperature... -65°C to 150°C regulator will go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent
Recommended Operating Conditions
(3) damage. 3) The device is not guaranteed to function outside of its Supply Voltage VIN ... 4.5 to 24V operating conditions. RECOMMENDED FOR Output Voltage V 4) Measured on JESD51-7, 4-layer PCB. OUT.. 0.8V to VIN*DV Operating Junction Temp (TJ).. -40°C to +125°C NEW DESIGNS NOT REFER T MP2315 Rev. 1.01 www.MonolithicPower.com 2 1/8/2014 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2014 MPS. All Rights Reserved.
MP2315GJ TSOT23-8 AGC * For Tape & Reel, add suffix –Z (e.g. MP2315GJ–Z);
PACKAGE REFERENCE TOP VIEW
AAM 1 8 FB IN 2 7 VCC SW 3 6 EN/SYNC GND 4 5 BST
TSOT23-8 ABSOLUTE MAXIMUM RATINGS
(1)
Thermal Resistance
(4)
θJA θJC
VIN ..–0.3V to +28V TSOT23-8…………………...…….100…..55..°C/W VSW.. –0.3V (-5V<10ns) to +28V (30V<10ns) V
Notes:
BST .. VSW+6V 1) Exceeding these ratings may damage the device. All Other Pins..-0.3V to +6V 2) The maximum allowable power dissipation is a function of the Continuous Power Dissipation (TA=+25°C)
(2)
... maximum junction temperature T MP2393 J (MAX), the junction-to- ambient thermal resistance θ ... 1.25W JA, and the ambient temperature TA. The maximum allowable continuous power dissipation at Junction Temperature...150°C any ambient temperature is calculated by PD (MAX) = (TJ Lead Temperature ..260°C (MAX)-TA)/θJA. Exceeding the maximum allowable power O dissipation will cause excessive die temperature, and the Storage Temperature... -65°C to 150°C regulator will go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent
Recommended Operating Conditions
(3) damage. 3) The device is not guaranteed to function outside of its Supply Voltage VIN ... 4.5 to 24V operating conditions. RECOMMENDED FOR Output Voltage V 4) Measured on JESD51-7, 4-layer PCB. OUT.. 0.8V to VIN*DV Operating Junction Temp (TJ).. -40°C to +125°C NEW DESIGNS NOT REFER T MP2315 Rev. 1.01 www.MonolithicPower.com 2 1/8/2014 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2014 MPS. All Rights Reserved.