Datasheet Microchip PIC10F200-I/OT — Ficha de datos

24C01C
1K 5.0V I2C™ Serial EEPROM
Features: Description: • Single Supply with Operation from 4.5V to 5.5V
• Low-Power CMOS Technology:
-Read current 1 mA, max.
-Standby current 5 A, max.
• 2-Wire Serial Interface, I2C™ Compatible
• Cascadable up to Eight Devices
• Schmitt Trigger Inputs for Noise Suppression
• Output Slope Control to Eliminate Ground Bounce
• 100 kHz and 400 kHz Clock Compatibility
• Page Write Time 1 ms max.
• Self-Timed Erase/Write Cycle
• 16-Byte Page Write Buffer
• ESD Protection >4000V
• More than 1 Million Erase/Write Cycles
• Data Retention >200 Years
• Factory Programming Available
• Packages include 8-lead PDIP, SOIC, TSSOP,
DFN, TDFN, MSOP and 6-lead SOT-23
• Pb-Free and RoHS Compliant
• Temperature Ranges:
-Industrial (I): …

PIC10F200/202/204/206
6-Pin, 8-Bit Flash Microcontrollers
Devices Included In This Data Sheet:
• PIC10F200 • PIC10F204 • PIC10F202 • PIC10F206 Low-Power Features/CMOS Technology:
• Operating Current:
-< 175 A @ 2V, 4 MHz, typical
• Standby Current:
-100 nA @ 2V, typical
• Low-Power, High-Speed Flash Technology:
-100,000 Flash endurance
-> 40 year retention
• Fully Static Design
• Wide Operating Voltage Range: 2.0V to 5.5V
• Wide Temperature Range:
-Industrial: -40C to +85C
-Extended: -40C to +125C High-Performance RISC CPU:
• Only 33 Single-Word Instructions to Learn
• All Single-Cycle Instructions except for Program
Branches, which are Two-Cycle
• 12-Bit Wide Instructions
• 2-Level Deep Hardware Stack
• Direct, Indirect and Relative Addressing modes
for Data and Instructions …