Datasheet ON Semiconductor 1N5242B — Ficha de datos

Zener Diodes
1N5221B -1N5252B
ABSOLUTE MAXIMUM RATINGS (Note 1)
Values are at TA = 25°C unless otherwise noted.
Parameter Value Unit Power Dissipation 500 mW Derate above 50°C 4.0 mW/°C Storage Temperature Range −65 to +200 °C Operating Junction Temperature Range −65 to +200 °C Lead Temperature (1/16 inch from case
for 10s +230 °C Symbol
PD
TSTG
TJ www.onsemi.com Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. These ratings are limiting values above which the serviceability of any
semiconductor device may be impaired.
Non−recurrent square wave Pulse Width = 8.3 ms, TA = 50°C. AXIAL LEAD
CASE 017AG MARKING DIAGRAM
$Y
22
1B
$Y
221B = Logo
= Specific Device Code ORDERING INFORMATION
See detailed ordering and shipping information on page 3 of
this data sheet. © Semiconductor Components Industries, LLC, 2018 April, 2021 − Rev. 4 1 Publication Order Number: …

Is Now Part of To learn more about ON Semiconductor, please visit our website at
www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Actio …