Datasheet LT3061 (Analog Devices) - 3

FabricanteAnalog Devices
Descripción45V VIN, Micropower, Low Noise, 100mA LDO with Active Output Discharge
Páginas / Página22 / 3 — ORDER INFORMATION http://www.linear.com/product/LT3061#orderinfo. LEAD …
Formato / tamaño de archivoPDF / 1.7 Mb
Idioma del documentoInglés

ORDER INFORMATION http://www.linear.com/product/LT3061#orderinfo. LEAD FREE FINISH. TAPE AND REEL. PART MARKING*

ORDER INFORMATION http://www.linear.com/product/LT3061#orderinfo LEAD FREE FINISH TAPE AND REEL PART MARKING*

Línea de modelo para esta hoja de datos

Versión de texto del documento

LT3061 Series
ORDER INFORMATION http://www.linear.com/product/LT3061#orderinfo LEAD FREE FINISH TAPE AND REEL PART MARKING* PACKAGE DESCRIPTION TEMPERATURE RANGE
LT3061EDCB-3.3#PBF LT3061EDCB-3.3#TRPBF LGZB 8-Lead (2mm × 3mm) Plastic DFN –40°C to 125°C LT3061IDCB-3.3#PBF LT3061IDCB-3.3#TRPBF LGZB 8-Lead (2mm × 3mm) Plastic DFN –40°C to 125°C LT3061EDCB-5#PBF LT3061EDCB-5#TRPBF LGYZ 8-Lead (2mm × 3mm) Plastic DFN –40°C to 125°C LT3061IDCB-5#PBF LT3061IDCB-5#TRPBF LGYZ 8-Lead (2mm × 3mm) Plastic DFN –40°C to 125°C LT3061EMS8E-3.3#PBF LT3061EMS8E-3.3#TRPBF LTGZJ 8-Lead Plastic MSOP –40°C to 125°C LT3061IMS8E-3.3#PBF LT3061IMS8E-3.3#TRPBF LTGZJ 8-Lead Plastic MSOP –40°C to 125°C LT3061EMS8E-5#PBF LT3061EMS8E-5#TRPBF LTGZH 8-Lead Plastic MSOP –40°C to 125°C LT3061IMS8E-5#PBF LT3061IMS8E-5#TRPBF LTGZH 8-Lead Plastic MSOP –40°C to 125°C Consult ADI Marketing for parts specified with wider operating temperature ranges. *The temperature grade is identified by a label on the shipping container. Consult ADI Marketing for information on nonstandard lead based finish parts. For more information on lead free part marking, go to: http://www.linear.com/leadfree/ For more information on tape and reel specifications, go to: http://www.linear.com/tapeandreel/. Some packages are available in 500 unit reels through designated sales channels with #TRMPBF suffix.
ELECTRICAL CHARACTERISTICS The
l
denotes the specifications which apply over the full operating temperature range, otherwise specifications are at TA = 25°C. (Note 3) PARAMETER CONDITIONS MIN TYP MAX UNITS
Minimum Input Voltage (Note 4) ILOAD = 100mA l 1.6 2.1 V Regulated Output Voltage (Note 5) LT3061-3.3: VIN = 3.9, ILOAD = 1mA 3.267 3.3 3.333 V LT3061-3.3: 3.9V < VIN < 45V, 1mA < ILOAD < 100mA l 3.234 3.366 V LT3061-5: VIN = 5.6, ILOAD = 1mA 4.950 5 5.050 V LT3061-5: 5.6V < VIN < 45V, 1mA < ILOAD < 100mA l 4.900 5.100 V ADJ Pin Voltage (Notes 4, 5) VIN = 2.1V, ILOAD = 1mA 594 600 606 mV 2.1V < VIN < 45V, 1mA < ILOAD < 100mA (E-, I-Grades) l 588 600 612 mV 2.1V < VIN < 45V, 1mA < ILOAD < 100mA (MP-, H-Grades) l 585 600 612 mV Line Regulation (Note 4) LT3061-3.3: ΔVIN = 3.9V to 45V (E-, I-Grades) l 1.6 22 mV ILOAD = 1mA LT3061-5: ΔVIN = 5.6V to 45V (E-, I-Grades) l 3.1 33 mV LT3061: ΔVIN = 2.1V to 45V (E-, I-Grades) l 0.5 4 mV LT3061: ΔVIN = 2.1V to 45V (MP-, H-Grades) l 6 mV Load Regulation (Note 4) LT3061-3.3: VIN = 3.9V (E-, I-Grades) l 4.4 25 mV ΔILOAD = 1mA to 100mA LT3061-5: VIN = 5.6V (E-, I-Grades) l 5.0 36 mV LT3061: VIN = 2.1V (E-, I-Grades) l 0.2 4 mV LT3061: VIN = 2.1V (MP-, H-Grades) l 9 mV Dropout Voltage ILOAD = 1mA 65 110 mV VIN = VOUT(NOMINAL) ILOAD = 1mA l 180 mV (Notes 6, 7) ILOAD = 10mA 130 180 mV ILOAD = 10mA l 270 mV ILOAD = 50mA 195 240 mV ILOAD = 50mA l 350 mV ILOAD = 100mA 250 290 mV ILOAD = 100mA l 430 mV GND Pin Current ILOAD = 0 l 45 90 µA VIN = VOUT(NOMINAL) + 0.6V ILOAD = 1mA l 70 120 µA (Notes 6, 8) ILOAD = 10mA l 225 500 µA ILOAD = 50mA l 0.8 1.8 mA ILOAD = 100mA l 2 4 mA 3061fb For more information www.linear.com/LT3061 3